EPHA Hose Protectors are tough, abrasion-resistant shields that withstand solvents, oils, grease, and gasoline. With a high wear factor and a wide operating temperature range (-40°C to 221°C), they safeguard equipment in harsh conditions.
| SKU | Protector Size (W x L) | Qty | Cable Tie Required to Install (not included) |
| GTSE-HP4B/1 | 2.5" x 4" | 1 x 4" Hose Protector | 3 x GCT20048B |
| GTSE-HP6B/1 | 3.25" x 6" | 1 x 6" Hose Protector | 3 x GCT30048B |
| GTSE-HP8B/1 | 3.5" x 8" | 1 x 8" Hose Protector | 3 x GCT30048B |
| GTSE-HP10B/1 | 4.5" x 10" | 1 x 10" Hose Protector | 4 x GCT37076B |
| GTSE-HP12B/1 | 5" x 12" | 1 x 12" Hose Protector | 4 x GCT37076B |
Protects Against
• Hose and wiring abrasion caused by points of contact
• Expensive hose and wiring repair bills
• Fires caused by failed oil & electrical systems
• Lost profits from costly down time
• DEQ oil spills & clean-up
Product Features
• Extremely high wear factor
• Wide operating temperature range (-40°C to 221°C) provides protection in a variety of applications
• Impervious to solvents, oils, grease, gasoline, etc.
• Easy installation in minutes
• Exceptionally cost-effective
• Available in 5 sizes – 4”, 6”, 8”, 10” and 12”
• Every order shipped in counter display boxes
Installing an EPHA Hose Protector is a quick and effective way to shield hoses from abrasion, whether during assembly or replacement. There's no need to disassemble lines or disrupt hydraulic systems, making it a versatile solution for spot applications.
- Identify the problem area on the hose.
- Position the Hose Protector over the affected section.
- Secure with cable ties, tightening them with pliers.
- Trim the excess tie length—your hose is now protected from wear!
